Battery Terminals

Our terminal blocks
To connect your cables to the battery terminals, we have developed the terminal block. It is a terminal block and terminal lug in one. Screws and washers are made of stainless steel (A2). Skyllermarks is a Swedish quality brand known for its durability and function in vehicles, boats and solar energy systems. Order your terminal blocks with us!

Pole terminals are used when you need a reliable connection to battery poles – for example in automotive, marine, solar or power systems where high amperage and clear wiring are critical.

On the pole terminal, you can put up to four coarse cables without them getting on top of each other. This allows you to tighten them properly to avoid voltage drops.
All contact surfaces are milled flat and the entire terminal block is made of tinned brass. All screws, washers and nuts are stainless steel.

All terminal blocks are made in Sweden and are delivered without a protective cover that can easily be added for extra safety. Don’t forget to fit a protective cover over your terminal block.
Tips for best function

Put only one cable per screw. If there are not enough fixing points, run a cable to a terminal block and then several cables from there.
Tighten the cables firmly!
Mount carefully on the lead pole. Press down firmly, but do not overtighten

Advantages of our terminal blocks

One cable per screw provides optimal contact, reduces voltage drop and increases safety

Milled surfaces provide better electrical conduction and contact pressure
Tin-plated brass & stainless steel fasteners withstand harsh environments and resist corrosion

Technical specification
We offer three size ranges:

S – 60 × 15 × 26 mm, 4 connections via M6 screws, max cable area 50 mm² (variant for + and – pole respectively).
L- 60 × 15 × 26 mm, 2 M6 screws + 1 M8, max cable area 120 mm²
M10 – 55× 15 × 26 mm, 2 M6 screws + 1 M10, max cable area 120 mm²