Skyllermark bus bar – safe and reliable connection for high loads
Do you want to avoid voltage drops and get a stable electrical connection? With a quality bus bar, good cables and proper cable lugs, you can ensure a safe and long-lasting installation.
For best results, it is recommended that you fit only one cable lug per screw. When the cable lug is tightened properly, oxygen is prevented from entering, which prevents oxidation and ensures that the coupling lasts for many years without losing voltage.
Advantages of this bus bar:
Remember to always fit a protective cover over the bus bar to increase safety and protect the connections.
150,00 kr 120,00 kr
In stock
Bus Bar – Compact and Practical Solution for Low-Voltage Installations
A compact and practical bus bar specifically designed for connecting electrical loads in vehicle electrical systems and other low-voltage applications.
Ideal for use in marine environments where space is limited and reliable power distribution is essential.
This bus bar ensures secure and organized cable connections, making it a perfect choice for boats and other marine vessels.
Protective covers reduce the risk of electric shock and accidents by shielding exposed wires and components. For that reason, we always recommend installing protective covers over fuse holders and bus bars to prevent short circuits.
Protective covers reduce the risk of electric shock and accidents by shielding exposed wires and components. For that reason, we always recommend installing protective covers over fuse holders and bus bars to prevent short circuits.
Protective covers reduce the risk of electric shock and accidents by shielding exposed wires and components. For that reason, we always recommend installing protective covers over fuse holders and bus bars to prevent short circuits.
The maximum cable size of 6 mm² applies when all connection points are used with cables of the same dimension.
If you need to connect a thicker cable, that’s also possible. You can combine thick and thin cables or leave some connection points unused – allowing the installation to be adapted to your specific needs.
Remember to always fit a protective cover over the bus bar to increase safety and protect the connections. Suitable protective cover is Protective cover XXS.
Which color bus bar should you choose?
This guideline is written for cables, but it’s smart to follow the same logic for bus bars as well—then your power distribution point stays consistent and your whole electrical system becomes easier (and safer) to troubleshoot.
If you have only a 12 V system* (DC):
• Positive cable: Red
• Negative cable: Yellow or Black
If you have both 12 V* (DC) and 230 V (AC) onboard — for your 12 V system:
• Positive cable: Red
• Negative cable: Yellow (must not be black)
* “12 V system” here means voltages up to 50 V DC.
If you have questions regarding this product, don’t hesitate to contact us. You may reach us by this form or the email
This website is protected by reCAPTCHA and Googles Terms & Conditions apply
En 
Sv
Reviews
There are no reviews yet.